Klüber SYNTHESO PROBA 270 Grease for valves and fittings 50g tube

SYNTHESO PROBA 270 Grease for valves, fittings and plain bearings | N° 006003

• SYNTHESO PROBA 270 and 330 are greases based on polyalkylene glycol and barium soap thickener for applications subject to cold and hot water, e.g. in autoclaves and high-temperature dyeing installations.
• Temperature range: -40°C to +130°C 
• Volume: 50 g tube
• Also available in: 1 kg can, 25 kg bucket

Benefits for your application

• Good resistance to hot water and aqueous alkaline solutions
• Good ageing resistance
• Neutral towards many rubber-elastic materials

Applications

• For valves and fittings which are subject to cold and hot water and not in contact with tap water
• For plain bearings to increase their sliding capacity and service life
• Assembly aid for many rubber-elastic materials

Application notes

• The lubricant can be applied by brush or spatula onto the clean and degreased surface. 

Technical specifications

Chemical composition, type of oil	PAG
Chemical composition, thickener	barium soap
Lower service temperature	-40 °C
Upper service temperature	130 °C
Colour space	beige
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	250 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	290 x 0.1 mm
Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C	1 – 100 corrosion degree
Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C	<= 1 400 mbar
Drop point, DIN ISO 2176, IP 396	>= 150 °C

---

Hazard Information (CLP)

Signal Word: Warning

Hazard Statements (H-phrases)

• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements (P-phrases)

Prevention:

• P272: Contaminated work clothing should not be allowed out of the workplace.
• P273: Avoid release to the environment.
• P280: Wear protective gloves.

Response:

• P302 + P352: IF ON SKIN: Wash with plenty of water.
• P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
• P362 + P364: Take off contaminated clothing and wash it before reuse.

Hazardous Components for Labeling

• N-1-Naphthylaniline
• N,N-bis(2-ethylhexyl)-5-methyl-1H-benzotriazol-1-methylamine
• N,N-bis(2-ethylhexyl)-4-methyl-1H-benzotriazol-1-methylamine
• 2H-Benzotriazol-2-methanamine, N,N-bis(2-ethylhexyl)-4-methyl-
• 2H-Benzotriazol-2-methanamine, N,N-bis(2-ethylhexyl)-5-methyl-
• 1H-Benzotriazol-1-methanamine, N,N-bis(2-ethylhexyl)-6-methyl-(Mixture)

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com