Klüberalfa MR 3-500 Universal sliding fluid 500ml can

SKU: ID732585c26d
Isporučivo

1.173,87  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Category:

Opis

Universal sliding fluid for seals, guideways and plastic friction points

  • Car manufacturers are confronted with the need to prevent creaking noises (NVH requirements), in particular when a new vehicle model is being launched.
  • The sliding fluids Klüberalfa MR 3 based on PFPE are resistant to evaporation and were specifically developed for NVH requirements and lifetime lubrication. They offer a less
    expensive alternative to other noise-reducing products such as films or adhesive tapes.
  • Klüberalfa MR 3 products are highly compatible with most elastomers and plastics. Due to their being visually neutral, they can be used for applications in car interiors as well as in other industrial sectors.
  • Klüberalfa MR 3 is available in three different viscosities and supplied in a pump spray dispenser that does not release greenhouse gases.
  • It is easy to use in economically small quantities and does not give off combustible or flammable solvent vapours. The product forms a homogeneous lubricating film.
  • Size: 500ml canister
  • Available in 100ml bottle , 500ml canister

Benefits for your application

  • Reduced noise and optimised friction
  • Can be combined with numerous material combinations
  • Easy and reliable application

Application

  • Due to its good compatibility, Klüberalfa MR 3 may be used in combination with most materials, e.g. leather, textile or plastic, in car interiors or on the car body.
  • Klüberalfa MR 3 is compatible with most thermoplastics or thermosetting plastics used, for example, in dashboards, seat and sunroof sliding rails, arm rests, seat adjustment mechanisms, door and sunroof seals.
  • Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.

Technical specifications
 

Article number90195
Chemical composition, type of oilPFPE
Chemical composition, solventfluorinated solvent
Upper service temperature200 °C / 392 °F
Appearanceclear
Density at 20 °Capprox. 1,55 g/cm³
Pour point, DIN ISO 3016<= -30 °C
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ ASTM D-445/ASTM D 7042, 40 °Capprox. 395 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ ASTM D-445/ASTM D 7042, 100 °Capprox. 38 mm²/s
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.24 Monate
 

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klüberalfa MR 3-500 Universal sliding fluid 500ml can”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)