Klübersynth GE 46-1200 Synthetic long-term fluid grease 400g cartridge

SKU: IDbb45da40d0
Isporučivo

116,83  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Isporučivo
Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Category:

Opis

Klübersynth GE 46-1200 Synthetic long-term fluid grease with excellent anticorrosive effect | N° 027035
  • Small gear systems demand high efficiency and a lubricant with a wide temperature range along with a long service life.
  • Our fully synthetic long-term fluid gear grease Klübersynth GE 46-1200 based on a polyglycol base oil and a lithium soap thickener was especially developed to meet the tough requirements of advanced small gears.
  • The combination of base oil and additives offers optimised wear protection under mixed friction and good pressure absorption capacity in the lubrication of gears.
  • Klübersynth GE 46-1200 also offers excellent corrosion protection and good compatibility with sealing elastomers. 
  • Volume: Cartridge 400g
  • Also available in: Can 1 kg, Bucket 25 kg, Drum 180 kg
Benefits for your application
  • Reliable lubricant film formation in a wide service temperature range
  • Good wear protection and high pressure absorption capacity
  • Optimised friction behaviour leading to higher efficiency
  • Good seal life due to excellent compatibility
  • Excellent backflow to the friction point
  • Excellent ageing and oxidation resistance for long service life
Application
  • We developed Klübersynth GE 46-1200 on the basis of our long experience in the lubrication of spur, bevel and worm gears.
  • Especially for steel/steel combinations, for example in small and miniature gears, gear motors and power tool gears, Klübersynth GE 46-1200 offers outstanding performance characteristics.
Application notes
  • Medium peripheral speeds of 4-5 m/s can be effectively handled by this grease. It also provides vibration and noise damping. Klübersynth GE 46-1200 can also be used to optimise the lubrication of ball and roller guides, plain and rolling bearings, and toothed couplings from – 30 to 120 °C.

Product data:

 Article number 027035
 NLGI grade, DIN 51818 00
 Color space brown
 Texture homogeneous
 Density at 20 °C approx. 0.99 g/cm³
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 400 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 430 x 0.1 mm
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 120 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 20 mm²/s
 Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer <= 2 000 mPas
 Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C 1 – 100 corrosion degree
 FZG scuffing test, DIN ISO 14635-1, A/8.3/90, change in weight < 0.2 mg/kWh
 FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage > 12
 Drop point, DIN ISO 2176, IP 396 >= 160 °C
 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
 original container, approx.
 24 months

 


Hazard Information (CLP)

Signal word: Warning.

Hazard Statements (H-phrases)
  • H317 May cause an allergic skin reaction.
Precautionary Statements (P-phrases)
Prevention:
  • P272 Contaminated work clothing should not be allowed out of the workplace.
  • P280 Wear protective gloves.
Response:
  • P302 + P352 IF ON SKIN: Wash with plenty of water and soap.
  • P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
  • P362 + P364 Take off contaminated clothing and wash it before reuse.
Hazardous Components for Labeling
  • Molybdenum trioxide, reaction products with Bis [O,O-bis(2-ethylhexyl)] hydrogen dithiophosphate
  • Condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol

 

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com

Downloads

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Klübersynth GE 46-1200 Synthetic long-term fluid grease 400g cartridge”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)