Opis
Klübersynth JIP 84-402 Special grease for low frictional torques in ball joints | N° 094108
- Special lubricating grease avoiding stick-slip
- Temperature range: -40°C to +120°C
- Volume: 1kg can
- Also available in: 25kg bucket, 180kg drum
Benefits for your application
- Energy savings achieved through particularly low friction coefficient
- Reduction of stick-slip and breakaway noise
- For heavily loaded plastic/steel combinations
- Particularly good corrosion protection
- Cost-effective alternative to PFPE greases with similar friction coefficient
Applications
- For very heavily loaded steel/plastic combinations (like steel/ PEEK) to achieve very low friction coefficients under sliding friction and for ball joints of the material combination steel/ plastic.
- Developed to meet the special requirements of wheel-, supporting- and guiding joints.
Application notes
- Klübersynth JIP 84-402 can be applied by brush, spatula, grease gun, grease metering gun, automatic metering units, grease cartridge, conventional metering systems and central lubrication systems (single-line systems).
- We recommend to test metering under practical conditions with the original equipment prior to use.
Technical specifications
| Article number | 0941080037 |
| Chemical composition, solid lubricant | PTFE |
| Chemical composition, thickener | lithium soap |
| Chemical composition, type of oil | synthetic hydrocarbon oil |
| Lower service temperature | -40 °C / -40 °F |
| Upper service temperature | 120 °C / 248 °F |
| Colour space | beige |
| Texture | fibrous |
| Texture | homogeneous |
| Density at 20 °C | approx. 1.10 g/cm³ |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Recenzije
Još nema recenzija.