Klübertemp HCB 83-402 High-temperature lubricant for roller chain 10kg
16.651,36 € cijena bez PDV-a
Pošaljite upit za ovaj proizvod
Imate li pitanja?
+385 98 1777 898Uvijek dostupni
Opis
Klübertemp HCB 83-402 High-temperature lubricant for roller chains in stenter frames
- Klübertemp HCB 83-402 is a synthetic high-temperature lubricant for roller chains based on perfluorinated polyether oilsand a new combination of PTFE solid lubricants. KlübertempHCB 83-402 does not harden in continuous operation,extending machine availability.
- Relubrication of friction points is also made easier. Selectedbase oils provide the optimum combination of evaporationstability and the right viscosity for operation. The lubricantremains in the friction point for longer and increases the lifeexpectancy of your roller chain.
- Klübertemp HCB 83-402 offers long relubrication intervals,reduced maintenance requirements and good wear protectionto reduce your operating costs.
- Temperature range: -30°C to +260°C
- Volume: 10 kg bucket
- Also available in: 800g cartridge, 1 kg can
Benefits for your application
- Long relubrication intervals for high efficiency
- Resistant towards aggressive chemicals in textile softening and finishing agents
- Long-standing effective use at leading manufacturers of stenter frames
Application
- Klübertemp HCB 83-402 was specially developed for the longterm lubrication of rolling bearings in roller chains of highperformance stenter frames. The lifetime of the anti-spreader chain determines the performance and efficiency of your entire plant. Drying, conditioning and heat-setting may involve temperatures above 200 °C. Additionally, chain and lubricant are in contact with aggressive media from softening and finishing agents.
- Under these conditions, Klübertemp HCB 83-402 has proven to be a durable and reliable lubricant. Klübertemp HCB 83-402 is generally regarded as neutral towards elastomers and plastics (with the possible exception of perfluorinated rubber). No negative effects are known when used with chain lubricants like Klüber PRIMIUM FLUID SPECIAL.
Technical specifications
| Article number | 090083 |
| NLGI grade, DIN 51818 | 2 |
| Chemical composition | solid lubricant |
| Chemical composition, type of oil | PFPE |
| Lower service temperature | -30 °C / -22 °F |
| Upper service temperature | 260 °C / 500 °F |
| Density at 20 °C | approx. 1.87 g/cm³ |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C | approx. 40 mm²/s |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C | approx. 420 mm²/s |
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water | <= 1 corrosion degree |
| Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer | approx. 12 500 mPas |
| Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. | 60 months |
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
Downloads
Budite prvi koji će recenzirati “Klübertemp HCB 83-402 High-temperature lubricant for roller chain 10kg”
Related products
Klüber HOTEMP 2000 High-temperature lubricating chain oil 5l canister
1.089,98 € cijena bez PDV-a Isporučivo
Recently Viewed Products
Klübersynth R 42-111 Fully synthetic speciality grease for seals 1kg
236,44 € cijena bez PDV-a Isporučivo
Klüberalfa YV 93-1202 Sliding agent for valves, fittings 1kg tin
5.319,88 € cijena bez PDV-a Isporučivo
Recenzije
Još nema recenzija.