Loctite EA M-21HP MED Two Part Medical Device Epoxy Adhesive 50ml

SKU: ID6e9e38bacc
Na zalihi

69,28  cijena bez PDV-a

Pošaljite upit za ovaj proizvod

Imate li pitanja?

+385 98 1777 898Uvijek dostupni

Najbolje cijene

Kompetentne cijene!

Zadovoljstvo zajamčeno!

Visoka razina kvalitete!

Dostupni stručnjaci

Besplatno savjetovanje!

Najbrža moguća isporuka

Brzo i sigurno!

Opis

LOCTITE® EA M-21HP (known as LOCTITE® M-21HP) is an off-white, 2-part, epoxy adhesive which cures at room temperature once mixed, to form a tough bondline which provides high peel resistance and high shear strength. 

  • Pack size: 50ml double cartridge (Loctite no. 235017)
Application
  • Provides excellent bond strength to a wide variety of substrates including glass, plastics and metals.
  • The fully cured epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
  • ISO 10993 compliant for use in the assembly of disposable medical devices
Characteristics
  • Excellent peel resistance 
  • High shear strengths
  • Cures at room temperature
  • Works on a wide variety of substrates
Technical Information
 Chemical Type  Epoxy
 Appearance (Resin) Off-white to beige liquid
 Appearance (Hardener) Light straw colored liquid 
 Appearance (Mixture)  Off-white
 Components  Two part – Resin & Hardener
 Viscosity Medium
 Mix Ratio, by weight – Resin : Hardener 100:55
 Mix Ratio, by volume – Resin : Hardener 2 : 1
 Cure Room temperature cure after mixing

Loctite EA M21HP MED, Loctite EAM-21HP


Hazard Information (CLP)

  

 

Contents:

  • Part A: 4,4′-Methylen diphenyldiglycidylether, Bis(4,4′-glycidyloxyphenyl)-propan, 2-Propenoic acid, 2-methyl-, methyl ester, polymer with 1,3-butadiene, butyl-2-propenoate, and styrene, dodecan-1-thiol.
  • Part B: Phenol, 4,4′-(1-Methylethyliden)bis-, polymer with 2-(Chloromethyl)oxirane, reaction products with 3,3′-[Oxybis(2,1-ethandiyloxy)]bis[1-3,3′-Oxybis(ethylenoxy)bis(propylamine)], benzyl alcohol.

Pictograms:

  • Part A: No information on pictograms.
  • Part B: Hazard (as per the hazard signal word “Danger”).

Signal word:

  • Part A: Warning
  • Part B: Danger

Hazard statements:

  • Part A:
    • H315 Causes skin irritation.
    • H317 May cause allergic skin reactions.
    • H319 Causes serious eye irritation.
    • H411 Toxic to aquatic life with long-lasting effects.
  • Part B:
    • H302 Harmful if swallowed.
    • H314 Causes severe skin burns and eye damage.
    • H317 May cause allergic skin reactions.

Precautionary statements:

  • Prevention:
    • Part A: P273 Avoid release to the environment.
    • Part A: P280 Wear protective gloves.
    • Part B: P280 Wear protective gloves/protective clothing/eye protection/face protection.
  • Response:
    • Part A: P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
    • Part A: P302+P352 IF ON SKIN: Wash with plenty of water and soap.
    • Part A: P337+P313 If eye irritation persists: Get medical advice/attention.
    • Part B: P303+P361+P353 IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water [or shower].
    • Part B: P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    • Part B: P310 Immediately call a POISON CENTER/doctor.
    • Part B: P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

 

Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

Downloads

Dodatne informacije

Property

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Loctite EA M-21HP MED Two Part Medical Device Epoxy Adhesive 50ml”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)